Covered See
Figure 011-1.
The NESC covers:
1. Supply and communication facilities (including metering) and associated work practices employed by a public or private electric supply, communications, railway, trolley, street and area lighting, traffic signal (or other signal), irrigation district or other community owned utility, or a similar utility in the exercise of its function as a utility.
2. The generation, transmission, and distribution of electricity, lumen's, communication signals, and communication data through public and private utility systems that are installed and maintained under the exclusive control of utilities or their authorized representatives.
3. Utility facilities and functions of utilities that (a) either generate energy or signals or accept energy or signals from another entity and (b) provide that energy or signals through a delivery point to another entity.
4. Street and area lights that provide a supply of lumen's where these facilities are supplied by underground or overhead conductors installed and/or maintained under the exclusive control of utilities (including their authorized contractors or other qualified persons.
5. Utility facilities and functions on the line side of the service point located on public or private property in accordance with legally established easements or rights-of-way, contracts, other agreements (written or by conditions of service), or as authorized by a regulating or controlling body.
Agreements to locate utility facilities on property are required where easements are either (a) not obtainable (such as locating utility facilities on existing rights-of-way of railroads or other entities, military bases, federal lands, Native American reservations, lands controlled by a port authority, or other governmental agency) or (b) not necessary (such as locating facilities necessary for requested service to a site).
6. Wiring within a supply station or in an underground facility that is (a) installed in accordance with Part I or Part 3 of this Code and maintained under the exclusive control of utilities and (b) necessary for the operation of the supply station or underground facility.
7. Utility facilities installed, maintained, and controlled by utilities on surface or underground mine sites, including overhead or underground distribution systems providing service up to buildings or outdoor equipment locations on the line side of the service point.
8. Similar systems to those listed above that are under the exclusive control of qualified persons and authorized by a regulating or controlling body, including those associated with an industrial complex or utility interactive system.
Purpose
A. The purpose of the NESC is the practical safeguarding of persons, utility facilities, and affected property during the installation, operation, and maintenance of electric supply and communication facilities, under specified conditions.
NOTE: NESC rules are founded upon the fundamental principles used for safety of utility facilities, and the NESC is globally accepted as good engineering practice.
B. NESC rules contain the basic provisions, under specified conditions, that are considered necessary for the safeguarding of:
1. The public,
2. Utility workers (employees and contractors),
3. Utility facilities,
4. Electric supply and communication equipment connected to utility facilities, and
5. Other facilities or premises adjacent to or containing utility facilities.
C. NESC rules are intended to provide a standard of safe practices that can be adopted by public utilities, private utilities, state or local utility commissions or public sen!ice commissions, or other boards or bodies having control over safe practices employed in the design, installation, operation, and maintenance of electric supply~ communication, street and area lighting, signal, or railroad utility facilities.
D. This Code is not intended as a design specification or as an instruction manual.