درباره ما
NEMA - National Electrical Manufacturers Association: Recent submissions
Now showing items 101-120 of 346
-
NEMA PB 2.1
Abstract: This publication covers floor-mounted deadfront switchboards which consist of an enclosure, molded case and low-voltage power circuit breakers, fusible or non-fusible switches, instruments, and metering, monitoring, or ... -
NEMA Z535.3
Abstract: This standard provides general criteria for the design, evaluation, and use of safety symbols to identify and warn against specific hazards, and to provide information to avoid personal injury.
Purpose ... -
NEMA TC 2
Abstract: NEMA TC 2-2013 covers the following types of Electrical Polyvinyl Chloride (PVC) Conduit (EPC), which may be constructed of single, solid layer of PVC, or may be constructed of multiple layers of PVC, one of which may be ... -
NEMA WC 63.1
Abstract: This standard primarily defines minimum electrical performance and allowable conductor sizes, stranding, and shielding for premise wiring cables for voice and data applications. The material and mechanical characteristics ... -
NEMA AB 3
Abstract: This application guide covers molded case circuit breakers and molded case switches, single-pole and multi-pole, fused and unfused, as well as accessories used with them.
These circuit breakers and switches are assembled ... -
NEMA NTCIP 2301
Abstract: NTCIP 2301 v02 (this application profile (AP)) is applicable to transportation devices and management systems that operate in Intelligent Transportation Systems (ITS). As an AP, NTCIP 2301 v02 specifies a set of protocols ... -
NEMA WC 67
Abstract: This standard covers the following uninsulated conductors: Single end (solid) and stranded; coated and uncoated copper;
• coated copper alloy;
• coated copper-clad steel;
• ... -
NEMA ICS 2
Abstract: The standards in this part apply to power circuit devices covered in all other parts in ICS 2 pertaining to power circuit devices unless otherwise specified. -
NEMA ANSLG C81.63
Abstract: This standard sets forth the specifications for gauges for bases (caps) and lampholders for electric lamps. -
NEMA C29.9
Abstract: This standard covers outdoor high-voltage postType apparatus insulators made of wet-process porcelain and used in the transmission and distribution of electrical energy. -
NEMA MW 1000
Abstract: This publication is designed to present in concise and convenient form all existing NEMA standards for magnet wire. It contains standards for round, rectangular, and square film insulated and/or fibrous covered copper and ... -
NEMA XR 23
Abstract: SCOPE OF THE DOCUMENT
This document defines the minimum set of quality control (QC) tests to be applied to the [Manufacturer to enter commercial name of hardcopy device], a hardcopy output ... -
NEMA C29.5
Abstract: This standard covers low- and medium-voltage-type insulators made of wet-process porcelain and used in the transmission and distribution of electric energy. -
NEMA TC 3
Abstract: This standard covers polyvinyl chloride (PVC) fittings intended to be joined in the field by means of a solvent cement system to PVC rigid conduit, tubing, and other fittings, based on the outside diameters given in NEMA ... -
NEMA MS 12
Abstract: This standards publication defines test methods for measuring the absolute spatial variation of geometric accuracy within MR images. This standard presents the absolute geometric accuracy as a map, graph, or table throughout ... -
NEMA ANSLG C78.377
Abstract: The purpose of this standard is to specify the range of chromaticities recommended for general lighting with Solid State Lighting (SSL) products, as well as to ensure that the white light chromaticities of the products can ... -
NEMA C78.30
Abstract: This standard describes the procedures to be followed for the construction of lamp space drawings. -
NEMA RN 1
Abstract: These standards cover continuous polyvinyl chloride exterior coatings, corrosion resistant interior coatings, and the galvanized steel conduit, galvanized steel intermediate metal conduit, threaded couplings, and elbows ...