درباره ما
NEMA - National Electrical Manufacturers Association: Recent submissions
Now showing items 181-200 of 346
-
NEMA RV 1
Abstract: Foreword
These application and installation guidelines offer practical information on correct usage and industry recommended practices for the installation of Type AC and Type MC cables in accordance ... -
NEMA C136.31
Abstract: This standard covers the minimum vibration withstand capability and vibration test methods for roadway and area luminaires. -
NEMA C119.4
Abstract: This standard covers connectors used for making electrical connections between aluminum-to-aluminum or aluminum-to-copper conductors used on distribution and transmission lines for electric utility.
This standard ... -
NEMA NTCIP 1103
Abstract: The Transportation Management Protocol (TMP) specifies an NTCIP Application Layer service. TMP defines a set of rules and procedures for exchanging transportation management information between transportation management ... -
NEMA NU 2
Abstract: The philosophy and rationale of the standards measurements and illustrative examples of the analysis and results are presented in:
Daube-Witherspoon ME, Karp JS, Casey ME, DiFilippo FP, Hines H, Muehllehner G, Simcic ... -
NEMA Z535.4
Abstract: This standard sets forth requirements for the design, application, use, and placement of safety signs and labels on a wide variety of products.
Purpose
The purposes of this standard are to:
a. ... -
NEMA TC 6 & 8
Abstract: This standard defines general requirements, performance requirements, test methods, and marking for the following types of PVC plastic utilities duct. The PVC duct specified in this standard is intended for installation ... -
NEMA Z535.5
Abstract: This standard sets forth requirements for the design, application, and use of safety tags and barricade tapes for temporary hazards. They shall be used only until the identified hazard is eliminated or the hazardous operation ... -
NEMA 260
Abstract: These labels are for use on pad-mounted switchgear and transformers sited in public areas, such as utility easements adjacent to residential properties, shopping centers, schools, etc. They may also be used for such equipment ... -
NEMA LD 3
Abstract: This Standards Publication covers high-pressure decorative laminate (HPDL) sheets which consist of papers, fabrics, or other core materials that have been laminated at pressures of more than 5.0 MPa using thermosetting ... -
NEMA ICS 1
Abstract: The scope of this publication is the scope of the Industrial Automation Control Products and Systems Section. The purpose of this publication is to consolidate all standards of a general nature in order to obtain uniform ... -
NEMA ANSLG C78.81
Abstract: This standard sets forth the physical and electrical characteristics of the principal types of fluorescent lamps intended for application on conventional line frequency circuits, and electronic high frequency circuits. ... -
NEMA SSL 6
Abstract: This standards publication provides interface recommendations for dimming control of integrated LED lamps intended for replacement of general service incandescent lamps operating at 120 volts, i.e., for operation with the ... -
NEMA Z535.6
Abstract: This standard sets forth requirements for the design and location of product safety messages in collateral materials for a wide variety of products.
Purpose
This standard is intended to:
a. ... -
NEMA WC 54
Abstract: This guide provides a combination of plans for the frequencies at which cable samples may be obtained for tests to determine conformance to the appropriate requirements of ICEA Standards Publications. Valid statistical ... -
NEMA AB 4
Abstract: NEMA Standards Publication AB 4 sets forth, for use by qualified personnel1, a number of basic procedures that may be used for the inspection and preventive maintenance of molded case circuit breakers used in ... -
NEMA IA 2.7
Abstract: This part of IEC 61131 defines a language for the programming of Fuzzy Control applications used by programmable controllers.
The object of this part of IEC 61131 is to offer the manufacturers and the users a well-defined ... -
NEMA TC 14
Abstract: This Standard specifies the requirements for halogen-free reinforced thermosetting resin conduit (RTRC), and associated fittings for installation and use in accordance with the Rules of the Canadian Electrical Code, (CEC) ... -
NEMA APPLICATION GUIDE AC ADJUSTABLE
Abstract: This Guide covers AC electrical drive systems, rated 600 volts or less, consisting of three-phase induction motors, voltage source pulse width modulated adjustable frequency controls, and associated components. The Guide ...