NEMA - National Electrical Manufacturers Association: Recent submissions
Now showing items 221-240 of 346
-
NEMA XR 22
Abstract: This document defines the minimum set of Quality Control (QC) tests to be applied to the [Manufacturer to enter commercial name], a [Manufacturer to specify display or workstation] labeled for final ... -
NEMA LE 4
Abstract: This standards publication contains definitions, dimensions, and tolerances for recessed luminaires designed to use fluorescent, high-intensity discharge and incandescent light sources.
Drawing examples show fluorescent ... -
NEMA C80.1
Abstract: This standard covers the requirements for electrical rigid steel conduit for use as a raceway for wires or cables of an electrical system. Finished conduit is produced in nominal 10 ft (3.05 m) lengths, threaded on each ... -
-
NEMA ICS 2.4
Abstract: The features, conventions, characteristics and attributes identified in this guide are those of magnetic contactors and thermal overload relays. These are components which may be used alone, or combined with other components, ... -
NEMA ANSLG C78.21
Abstract: This standard provides physical and electrical characteristics of the group of incandescent lamps that have PAR and R bulb shapes. Lamps with clear, frosted, and lens end bulbs, with clear and prescription lenses, and with ... -
NEMA NTCIP 1213
Abstract: Communication between an ITS Management Center or portable computer and an Electrical and Lighting Management System (ELMS) is accomplished by using the NTCIP Application Layer services to convey requests to access or ... -
NEMA C29.4
Abstract: This standard covers strain-type insulators made of wet-process porcelain and used in the transmission and distribution of electric energy. -
NEMA NTCIP 8004
Abstract: NTCIP 8004 v02 specifies a set of rules and protocols for organizing, describing, and defining transportation management information to be exchanged between transportation management applications and transportation equipment. ... -
NEMA ICS 10 PART 1
Abstract: The standards in this section apply to electromechanical automatic and nonautomatic transfer switches and bypass isolation switches rated 600 volts AC or less, 60 Hertz, for use on single-phase and polyphase AC circuits. -
NEMA IA 2.5
Abstract: Foreword
This Standards Publication is a NEMA Adoptive Standard based on Part 5 of IEC 61131, Programmable Controllers.
This Standards Publication was prepared by a technical committee of ... -
NEMA MG 2
Abstract: This publication provides recommendations for the selection, installation, and use of rotating electric machines in such a manner as to provide for the practical safeguarding of persons and property.
Excluded from the ... -
NEMA XR 7
Abstract: This standard defines electrical and structural test requirements of high-voltage cable assemblies and receptacles used in diagnostic medical X-ray equipment from 10kV to 200kV. -
NEMA NTCIP 2104
Abstract: This standard is applicable to transportation devices and management systems that must operate in Intelligent Transportation Systems. It specifies a set of protocols and standards applicable to the data link and physical ...Subject(s) : AASHTO , Ethernet , ITE , NEMA , NTCIP , Profile , Subnetwork , -
NEMA C136.26
Abstract: This troubleshooting guide is intended to help the service person quickly diagnose an HID luminaire with magnetic ballast and also ensure that the problem is fixed on the first attempt. This guide addresses the four commonly ... -
NEMA LL 8
Abstract: This standards publication covers limited integral, self-ballasted compact fluorescent lamps of all base types, such as E26, GU24, etc., hereinafter referred to as compact fluorescent lamps. -
NEMA ANSLG C78.43
Abstract: This standard sets forth the physical and electrical requirements for single-ended metal halide lamps operated on 60 Hz ballasts to ensure interchangeability and safety. The data given also provides the basis for the ... -
NEMA C12.10
Abstract: This standard covers the physical aspects of both detachable and bottom-connected watthour meters and associated registers. These include ratings, internal wiring arrangements, pertinent dimensions, markings, and other ... -
NEMA C136.20
Abstract: This standard applies to fiber-reinforced composite (FRC) lighting poles used for roadway and area lighting. This standard includes nomenclature, dimensional data, performance criteria, and some interchangeability features ...