درباره ما
ASME - ASME International
Browse by
Recent Submissions
-
Safety Standard for Pressure Vessels for Human Occupancy: In-Service Guidelines
Abstract: INTRODUCTION AND SCOPE (a) This Standard provides technical requirements and guidelines for the operation and maintenance of PVHOs and PVHO systems that were designed, constructed, tested, and certified in accordance with ... -
Safety Standard for Pressure Vessels for Human Occupancy
Abstract: Application This Standard applies to all pressure vessels that enclose a human within their pressure boundary while under internal or external pressure exceeding a differential pressure of 2 psi (15 kPa). PVHOs include, ... -
Material Placement Systems Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings
Abstract: Volume B30.24 includes provisions that apply to the construction, installation, operation, inspection, testing, and maintenance of container cranes used for lifting purposes, in conjunction with equipment described in other ... -
Code on Nuclear Air and Gas Treatment
Abstract: This Code provides requirements for the performance, design, fabrication, installation, inspection, acceptance testing, and quality assurance of equipment used in air and gas treatment systems in nuclear facilities. PURPOSE The ... -
Elevator and Escalator Electrical Equipment
Abstract: The requirements of this Standard apply to the following electrical equipment for elevators, escalators, moving walks, dumbwaiters, material lifts, and elevating devices for persons with physical disabilities (platform ... -
Standard for Verification and Validation in Computational Solid Mechanics
Abstract: Purpose and Scope The purpose of this Standard is to provide the CSM community with a common language, a conceptual framework, and general guidance for implementing the processes of computational model V&V. To this end, ... -
Container Cranes
Abstract: Volume B30.24 includes provisions that apply to the construction, installation, operation, inspection, testing, and maintenance of container cranes used for lifting purposes, in conjunction with equipment described in other ... -
Abbreviations and Acronyms for Use in Product Definition and Related Documents
Abstract: The abbreviations and acronyms, hereinafter referred to as “abbreviations,” listed in this Standard are used on engineering drawings and related documentation. Purpose The intent of this Standard is to allow the use of ... -
Socket Wrenches, Handles, and Attachments
Abstract: This Standard provides performance and safety requirements for socket wrenches (sockets), handles used with these wrenches, nutdrivers, and attachments used with socket wrenches, hereinafter collectively referred to as ... -
Manually Operated Thermoplastic Gas Shutoffs and Valves in Gas Distribution Systems
Abstract: General (a) This Standard covers manually operated thermoplastic valves in nominal valve sizes ½ through 12. These valves are intended for use below ground in thermoplastic fuel gas distribution mains and service lines. The ... -
Safety Standard for Cableways, Cranes, Derricks, Hoists, Hooks, Jacks, and Slings
Abstract: The ASME B30 Standard contains provisions that apply to the construction, installation, operation, inspection, testing, maintenance, and use of cranes and other lifting and material-movement-related equipment. For the ... -
Model Organization Practices - Engineering Product Definition and Related Documentation Practices
Abstract: This Standard establishes a schema for organizing a three-dimensional (3D) model and other associated information within the context of a digital product definition data set for the purpose of conveying a product definition ... -
Floor and Trench Drains
Abstract: This Standard covers floor, area, adjustable floor, and trench drains that are used inside of, or outside and immediately adjacent to, building structures. This Standard specifies design requirements, definitions, ... -
Measurement Uncertainty Factors in the Calibration of Screw Thread Gages
Abstract: (a) This Standard notes technical factors that can explain measurement differences between two parties calibrating the same gage. It is directed to the metrology involved, not acceptance rules or other quality ... -
Driving and Spindle Ends for Portable Hand, Impact, Air, and Electric Tools (Percussion Tools Excluded)
Abstract: This Standard applies to portable power tools for drilling, grinding, polishing, sawing, and driving threaded fasteners, and hand tools for driving threaded fasteners. Other tools not classed as percussion tools belong ... -
Fasteners for Use in Structural Applications
Abstract: This Standard covers the complete general and dimensional data for five products in the inch series recognized as an American National Standard. These five structural products include (a) heavy hex structural bolts: ASTM ... -
Performance Standard for Hand Chain Manually Operated Chain Hoists
Abstract: (a) This Standard establishes performance requirements for hand chain manually operated chain hoists for vertical lifting service involving material handling of freely suspended (unguided) loads, using welded link type ... -
Bioprocessing Equipment
Abstract: SCOPE OF THE ASME BPE STANDARD The ASME BPE Standard provides requirements for systems and components that are subject to cleaning and sanitization and/or sterilization including systems that are cleaned in place (CIP’d) ... -
Product Definition for Composite Parts
Abstract: This Standard establishes the requirements for composite product definition that are not covered within the existing ASME Y14 Series of standards -
Rules for the Movement of Loads Using Overhead Handling Equipment in Nuclear Facilities
Abstract: This Standard specifies requirements for the movement of loads using overhead handling systems at commercial nuclear facilities. (a) For the purposes of this Standard, overhead handling systems are limited to the ...