Standard Specification for Steel Strand, Low-Relaxation Uncoated Seven-Wire for Concrete Reinforcement

AASHTO M 203M/M 203

contributor author	AASHTO - American Association of State Highway and Transportation Officials
date accessioned	2020-09-04T09:07:59Z
date available	2020-09-04T09:07:59Z
date copyright	2020
date issued	2020
identifier other	AXAYMGAAAAAAAAAA.pdf
identifier uri	https://lib.yabesh.ir/std/handle/yse/281343
description abstract	This specification covers two grades of uncoated low-relaxation, seven-wire steel strand for use in pretensioned and post-tensioned prestressed concrete construction. Grade 1725 [250] and Grade 1860 [270] have minimum ultimate strengths of 1725 MPa [250 ksi] and 1860 MPa [270 ksi], respectively, based on the nominal area of the strand. The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the inch-pound units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The supplementary requirements in S1 shall be specified for 15.24-mm- [0.600-in.-] diameter uncoated seven-wire steel strand if needed for applications in prestressed ground anchors
language	English
title	Standard Specification for Steel Strand, Low-Relaxation Uncoated Seven-Wire for Concrete Reinforcement	en
title	AASHTO M 203M/M 203	num
type	standard
page	9
status	Active
tree	AASHTO - American Association of State Highway and Transportation Officials:;2020
contenttype	fulltext