درباره ما
SS-A-666D
ASPHALT, PETROLEUM (BUILT - UP ROOFING, WATERPROOFING, AND DAMPPROOFING)
Organization:
ARMY - AV - Aviation and Missile Command
Year: 1968
Abstract: This specification covers petroleum asphalt for use as hot-cement and mopping coat in the construction of built-up roof coverings, in dampproofing, and in the construction of a membrane system of waterproofing. Intended Use: The suggested use for each type is not absolute, and overlapping of fields of use may occur between adjoining types, depending upon the kind and occupancy of the building involved; the kind of roof employed; the presence, absence, or thickness of any insulation; the specific material and construction used in the roofing membrane itself; and the temperatures and other climatic conditions to which the roofing may be subjected in service.
Type I - Suitable for use on roofs with inclines up to 1 inch per foot. Type II - Suitable for use on roofs with inclines from ½ up to 3 inches per foot. Type III - Suitable for use on inclines from ½ to 6 inches per foot. Type IV - Suitable for use on roofs with relatively steep slopes and generally in areas with relatively high temperatures. Type V - Suitable for use below ground level moderate temperature conditions both during the process of installation and service. Type VI - Suitable for use above ground level where not exposed to temperatures exceeding 125°F. (52°C.) Type VII - Suitable for use above ground level, where exposed on vertical surfaces in direct sunlight or at a temperature above 125°F. (52°C.).
Collections
:
Show full item record
| contributor author | ARMY - AV - Aviation and Missile Command | |
| date accessioned | 2017-09-04T16:55:21Z | |
| date available | 2017-09-04T16:55:21Z | |
| date copyright | 05/07/1968 | |
| date issued | 1968 | |
| identifier other | BVUTDAAAAAAAAAAA.pdf | |
| identifier uri | https://lib.yabesh.ir/std/handle/yse/118846 | |
| description abstract | This specification covers petroleum asphalt for use as hot-cement and mopping coat in the construction of built-up roof coverings, in dampproofing, and in the construction of a membrane system of waterproofing. Intended Use: The suggested use for each type is not absolute, and overlapping of fields of use may occur between adjoining types, depending upon the kind and occupancy of the building involved; the kind of roof employed; the presence, absence, or thickness of any insulation; the specific material and construction used in the roofing membrane itself; and the temperatures and other climatic conditions to which the roofing may be subjected in service. Type I - Suitable for use on roofs with inclines up to 1 inch per foot. Type II - Suitable for use on roofs with inclines from ½ up to 3 inches per foot. Type III - Suitable for use on inclines from ½ to 6 inches per foot. Type IV - Suitable for use on roofs with relatively steep slopes and generally in areas with relatively high temperatures. Type V - Suitable for use below ground level moderate temperature conditions both during the process of installation and service. Type VI - Suitable for use above ground level where not exposed to temperatures exceeding 125°F. (52°C.) Type VII - Suitable for use above ground level, where exposed on vertical surfaces in direct sunlight or at a temperature above 125°F. (52°C.). | |
| language | English | |
| title | SS-A-666D | num |
| title | ASPHALT, PETROLEUM (BUILT - UP ROOFING, WATERPROOFING, AND DAMPPROOFING) | en |
| type | standard | |
| page | 3 | |
| status | Active | |
| tree | ARMY - AV - Aviation and Missile Command:;1968 | |
| contenttype | fulltext |