NEMA ANSLG C82.11
Lamp Ballasts - High Frequency Fluorescent Lamp Ballasts
Organization:
NEMA - National Electrical Manufacturers Association
Year: 2011
Abstract: This standard is intended to cover high frequency ballasts which have rated open-circuit voltages of 2000 volts or less, operate the lamp at frequencies between 10 kHz and 500 kHz., and are intended to operate at a supply frequency of 50 Hz or 60 Hz. This comprises ballasts for hot-cathode fluorescent lamps, either switch-start (preheat-start), rapid-start (continuously heated cathodes), modified rapid start, programmed start, or instant start used primarily for lighting purposes. The ballast and lamp combinations covered by this specification are normally intended for use in room ambient temperatures of 10OC to 40OC. At ambient temperatures outside this range, certain special operating characteristics may be required.
Important Patent Disclaimer
It is possible that some of the elements of this document may be the subject of patent rights. When this document was approved for publication, ANSLG did not know of any patent applications, patents pending, or existing patents. ANSLG shall not be held responsible for identifying any or all such patent rights.
Important Patent Disclaimer
It is possible that some of the elements of this document may be the subject of patent rights. When this document was approved for publication, ANSLG did not know of any patent applications, patents pending, or existing patents. ANSLG shall not be held responsible for identifying any or all such patent rights.
Collections
:
-
Statistics
NEMA ANSLG C82.11
Show full item record
contributor author | NEMA - National Electrical Manufacturers Association | |
date accessioned | 2017-09-04T16:57:58Z | |
date available | 2017-09-04T16:57:58Z | |
date copyright | 01/01/2011 | |
date issued | 2011 | |
identifier other | XHWBNEAAAAAAAAAA.pdf | |
identifier uri | https://lib.yabesh.ir/std/handle/yse/121355 | |
description abstract | This standard is intended to cover high frequency ballasts which have rated open-circuit voltages of 2000 volts or less, operate the lamp at frequencies between 10 kHz and 500 kHz., and are intended to operate at a supply frequency of 50 Hz or 60 Hz. This comprises ballasts for hot-cathode fluorescent lamps, either switch-start (preheat-start), rapid-start (continuously heated cathodes), modified rapid start, programmed start, or instant start used primarily for lighting purposes. The ballast and lamp combinations covered by this specification are normally intended for use in room ambient temperatures of 10OC to 40OC. At ambient temperatures outside this range, certain special operating characteristics may be required. Important Patent Disclaimer It is possible that some of the elements of this document may be the subject of patent rights. When this document was approved for publication, ANSLG did not know of any patent applications, patents pending, or existing patents. ANSLG shall not be held responsible for identifying any or all such patent rights. | |
language | English | |
title | NEMA ANSLG C82.11 | num |
title | Lamp Ballasts - High Frequency Fluorescent Lamp Ballasts | en |
type | standard | |
page | 74 | |
status | Active | |
tree | NEMA - National Electrical Manufacturers Association:;2011 | |
contenttype | fulltext |