ACI 530/530.1 ERTA

ACI - American Concrete Institute

Building Code Requirements and Specification for Masonry Structures

Organization:

Year: 2011

Abstract: Minimum requirements
This Code provides minimum requirements for the structural design and construction of masonry elements consisting of masonry units bedded in mortar.
Governing building code
This Code supplements the legally adopted building code and shall govern in all matters pertaining to structural design and construction of masonry elements, except where this Code is in conflict with requirements in the legally adopted building code. In areas without a legally adopted building code, this Code defines the minimum acceptable standards of design and construction practice.
Design procedures
Masonry structures and their component members shall be designed in accordance with the provisions of this Chapter and one of the following:
(a) Allowable Stress Design of Masonry: Chapter 2.
(b) Strength Design of Masonry: Chapter 3.
(c) Prestressed Masonry: Chapter 4.
(d) Empirical Design of Masonry: Chapter 5.
(e) Veneer: Chapter 6.
(f) Glass Unit Masonry: Chapter 7.
(g) Strength Design of Autoclaved Aerated Concrete (AAC) Masonry: Appendix A.
(h) Masonry Infill, Appendix B.
SI information
SI values shown in parentheses are not part of this Code. The equations in this document are for use with the specified inch-pound units only. The equivalent equations for use with SI units are provided in Conversion of Units on Page C-201.

URI: https://lib.yabesh.ir/std/handle/yse/217310

Subject: AAC

Collections :

ACI - American Concrete Institute

Show full item record

contributor author	ACI - American Concrete Institute
date accessioned	2017-09-04T18:35:16Z
date available	2017-09-04T18:35:16Z
date copyright	40822
date issued	2011
identifier other	JIJHUEAAAAAAAAAA.pdf
identifier uri	https://lib.yabesh.ir/std/handle/yse/217310
description abstract	Minimum requirements This Code provides minimum requirements for the structural design and construction of masonry elements consisting of masonry units bedded in mortar. Governing building code This Code supplements the legally adopted building code and shall govern in all matters pertaining to structural design and construction of masonry elements, except where this Code is in conflict with requirements in the legally adopted building code. In areas without a legally adopted building code, this Code defines the minimum acceptable standards of design and construction practice. Design procedures Masonry structures and their component members shall be designed in accordance with the provisions of this Chapter and one of the following: (a) Allowable Stress Design of Masonry: Chapter 2. (b) Strength Design of Masonry: Chapter 3. (c) Prestressed Masonry: Chapter 4. (d) Empirical Design of Masonry: Chapter 5. (e) Veneer: Chapter 6. (f) Glass Unit Masonry: Chapter 7. (g) Strength Design of Autoclaved Aerated Concrete (AAC) Masonry: Appendix A. (h) Masonry Infill, Appendix B. SI information SI values shown in parentheses are not part of this Code. The equations in this document are for use with the specified inch-pound units only. The equivalent equations for use with SI units are provided in Conversion of Units on Page C-201.
language	English
title	ACI 530/530.1 ERTA	num
title	Building Code Requirements and Specification for Masonry Structures	en
type	standard
page	2
status	Active
tree	ACI - American Concrete Institute:;2011
contenttype	fulltext
subject keywords	AAC
subject keywords	masonry allowable stress design
subject keywords	anchors (fasteners)
subject keywords	anchorage (structural)
subject keywords	autoclaved aerated concrete masonry
subject keywords	beams
subject keywords	building codes
subject keywords	cements
subject keywords	clay brick
subject keywords	clay tile
subject keywords	columns
subject keywords	compressive strength
subject keywords	concrete block
subject keywords	concrete brick
subject keywords	construction
subject keywords	detailing
subject keywords	empirical design
subject keywords	flexural strength
subject keywords	glass units
subject keywords	grout
subject keywords	grouting
subject keywords	joints
subject keywords	loads (forces)
subject keywords	masonry cements
subject keywords	masonry load bearing walls
subject keywords	masonry mortars
subject keywords	masonry walls
subject keywords	modulus of elasticity
subject keywords	pilasters
subject keywords	prestressed masonry
subject keywords	quality assurance
subject keywords	reinforced masonry
subject keywords	reinforcing steel
subject keywords	seismic requirements
subject keywords	shear
subject keywords	specifications
subject keywords	splicing
subject keywords	strength
subject keywords	strength design
subject keywords	stresses
subject keywords	structural analysis
subject keywords	structural design
subject keywords	ties
subject keywords	unreinforced masonry
subject keywords	veneers
subject keywords	walls